The robot is designed to be run with a disposable bag that collects all of the debris. The bag is disposable to protect the health and safety of the user by minimizing how much the user has to interact with the debris. The robot is less effective when it is run with an overfilled bag, so it is important to check and replace the bag frequently.
The robot should never be run without a bag for the safety of the user and the robot. In order to ensure that the robot does not run without a bag, the Lid Handle has a safety switch that will not engage unless a bag is installed. If the Lid Handle is sitting straight up, that is a visual indicator that the bag is not installed and therefore the robot will not run.
Difficulty:
EASY
Materials:
NONE
Estimated Time:
2 Minutes
Instructions
-
Lift up the Lid Handle until you hear it click into place.
-
Open the Lid.
-
Remove the bag from the robot by pulling it up by the handles.
-
Evaluate if the bag is full.
-
If the bag feels heavy (weighs above 200g) or the volume of the bag is completely filled, then you should replace it. The bag should be checked every day and will likely need to be replaced every 7-14 days.
-
-
Throw the bag away if it is full.
-
Get a new bag.
-
Align the slots on the Bag Clip with the mount points the robot and push the bag into place until it is fully seated.
-
Close the lid. With a bag installed, the Lid Handle will automatically go down when the Lid is closed.
