The robot has a replaceable battery so that it can keep up with the demands of cleaning for a full 8-hour shift. When you remove the battery, it is best to place it into the charger as soon as you can.
Difficulty:
EASY
Materials:
NONE
Estimated Time:
2 Minutes
Instructions
-
If applicable, remove the dead battery from the robot by pulling it up from below.
-
Plug your charger into the wall and flip the switch to “ON.”
-
Place the battery into one of the charger bays.
-
Make sure the battery is fully seated and charging. The LED next to the charger bay will blink as it is charging.
-
When the LED next to the charger bay stays on and stops blinking, you will know that the battery is fully charged. Remove the battery from the charger by pulling it up from below.
